Praktek koneksi antar VLAN 15nov2016 -one stick router "enkapsulasi dot1Q"

langkah instruksi praktikum

1. buat topologi sesuai dengan contoh

2. konfigurasi IP Address & Gateway pada masing2 PC sesuai VLAN-nya

3. Konfigurasi Switch

   Switch>enable
   Switch#config terminal
   Switch(config)#vlan 10
   Switch(config-vlan)#name kadal
   Switch(config-vlan)#exit
   Switch(config)#vlan 20
   Switch(config-vlan)#name jangkrik
   Switch(config-vlan)#exit
   Switch(config)#
   Switch(config)#interface range fastEthernet 0/1-2
   Switch(config-if)#switchport mode access
   Switch(config-if)#switchport access vlan 10
   Switch(config-if)#exit
   Switch(config)#
   Switch(config)#interface fastEthernet 0/22
   Switch(config-if)#switchport mode trunk
   Switch(config-if)#exit
   Switch(config)#do show vlan brief
   Switch(config)#do show interface trunk
   Switch(config)#

4. KONFIGURASI PADA ROUTER

   Router>enable
   Router#config terminal
   Router(config)#interface fastEthernet 0/0
   Router(config-if)#no shutdown
   Router(config-if)#exit
   Router(config)#
   Router(config)#interface fastEthernet 0/0.10
   Router(config-subif)# encapsulation dot1Q 10
   Router(config-subif)# ip address 192.168.10.1 255.255.255.0
   Router(config-subif)# exit
   Router(config)#
   Router(config)#interface fastEthernet 0/0.20
   Router(config-subif)# encapsulation dot1Q 20
   Router(config-subif)# ip address 192.168.20.1 255.255.255.0
   Router(config-subif)# exit
   Router(config)#e

5. Test koneksi "ping" antara PC0 ke PC1